PDA

View Full Version : Advanced Driver



Dotte Courtney
09-21-2005, 3:28 PM
Hi,
I have a Versa laser 200 25watt, I am using Corel Draw 11, I have installed the advanced driver but can not get it to work. I keep getting a printer error message. Does anyone have any idea what I am doing wrong?
Thanks, Dotte

Mike Mackenzie
09-21-2005, 3:45 PM
Dottie,

What error message are you getting?

When you installed the driver what port did you assign?

Let me know and I can help you solve this problem.

Dotte Courtney
09-21-2005, 4:06 PM
An error message from the printer icon on tool bar, and I used port LPT1.

Mike Mackenzie
09-21-2005, 7:22 PM
Dottie,

You need to go to your printers section either by start then settings then printers or go into the control panel and then into printers and faxes

Find the advanced driver icon for the Versa click once and then right click go down to properties and click.

now find the ports tab and click on that. Once you are into this section find the port that says VERSA 1 port. Click on that and then click on apply.

This will fix the problem let me know if you need any other help.

Dotte Courtney
09-21-2005, 8:01 PM
Thank you thats all it was!