View Full Version : Baltic Birch Chalice and Paten
Brian Kent
05-12-2016, 3:03 PM
Well, I wondered if it would work…
…but 52 layers of glue is a wee bit hard on the tool edges.
Stan Smith
05-12-2016, 3:15 PM
Brian, you've got this chalice stuff down to a science. You always do such nice work. Very innovative to glue up that BB plywood and turn it. Awesome!
David Delo
05-12-2016, 9:51 PM
Well, I wondered if it would work……but 52 layers of glue is a wee bit hard on the tool edges.and dusty too.......looks nice Brian.
Roger Chandler
05-12-2016, 10:27 PM
That Baltic Birch ply really gives it an outstanding look....nicely done, Brian!
Sid Matheny
05-12-2016, 10:41 PM
Some of the best turned ply that I have seen.
John K Jordan
05-12-2016, 10:51 PM
Nicely done. I've seen Beads of Courage boxes done from plywood but they were not of the good stuff.
JKJ
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.