PDA

View Full Version : For the old timers


Rollie Kelly
05-07-2016, 10:14 AM
I realize this is a shot in the dark. In the early '80s, plans for a rearing rocking horse were published in one of the woodworking mags. In this design sheet metal was laminated between layers of wood. This gave enough strength so only the rear legs were joined to the rockers.
Any information, however slight, will be greatly appreciated.
Rollie
Charles Lent
05-07-2016, 2:41 PM
WOW ! I remember that, but have no idea where I saw it. I hope someone remembers, because I'm also interested in finding those plans, again.

Charley
Cary Falk
05-07-2016, 4:35 PM
I hve Woodsmith, Wood and Shop notes on DVD and I don't recall seeing it. Popular mechanics or fine woodworking maybe?
Rollie Kelly
05-08-2016, 8:36 AM
No, it wasn't FWW. Possibly PM or PS, although I was thinking it was a woodworking mag. Of course, I have slept since then!:confused:
Thanks anyway,
Rollie
Jon Endres
05-09-2016, 12:34 PM
Can't help you with the location of the original article, but with advances in technology, a laminated form out of hardwood and carbon fiber might work very well and you wouldn't have to worry about ruining blades and cutters on a metal sandwich.
Pat Barry
05-09-2016, 1:19 PM
I realize this is a shot in the dark. In the early '80s, plans for a rearing rocking horse were published in one of the woodworking mags. In this design sheet metal was laminated between layers of wood. This gave enough strength so only the rear legs were joined to the rockers.
Any information, however slight, will be greatly appreciated.
Rollie
I think you could do this easily with a third 'leg'. Maybe a strategically located column to support and stabilize the front of the rearing horse that was painted so as not to distract from the illusion of a beast standing on its hind legs.
Cary Falk
05-09-2016, 1:53 PM
I think you could do this easily with a third 'leg'. Maybe a strategically located column to support and stabilize the front of the rearing horse that was painted so as not to distract from the illusion of a beast standing on its hind legs.

Breyer uses the tail as a "third leg" so to speak on some of their models to achive stability
Rollie Kelly
05-10-2016, 7:23 AM
A lot of good ideas to ponder.
Thanks guys,
Rollie