View Full Version : Hurricane Laser Help

Tim Spiker
04-22-2016, 8:07 AM
I recently got a Lisa catagory 1 laser but there is not much info out there about them... I'm looking for info on it's power/speed specs as well as if the settings in laser works represent the actual setting or a percentage of the max power/speed.... it don't seem to be percentage on the speed because numbers greater than 100 work. Also looking for a rotary unit or info on what one works with my laser. Any other info would be greatly appreciated. Thanks

Bert Kemp
04-22-2016, 11:33 AM
Have you tried their tech support at Hurricane laser

Tim Spiker
04-22-2016, 12:10 PM
From what I understand they are no longer in business

Bert Kemp
04-22-2016, 12:26 PM
speed settings most likely mmps. what is the wattage of the tube?

Bert Kemp
04-22-2016, 12:28 PM
I would not try to run at 100% power try to stay at 90 or below.....this may help you.



Tim Spiker
04-22-2016, 12:48 PM
The problem is most of the charts i find seem to be based on a percent of power and speed and i believe the software for hurricane is not because i can set a speed of 200, 300, 400 and anywhere in between.. so without knowing what the max speed is i dont know how to convert to percentage... also i had been told it was a 60 watt laser but came across a old nbm video today showing the lisa as a 30 watt so that could be why my results are so different using settings for a 60 watt machine.

Bert Kemp
04-22-2016, 1:18 PM
Tim most speed setting are based on mmps most power setting are bases on % if you go with that and use the 30 watt chart you should be in the ball park

speed 200 mmps 30 mmps so on and so forth use % for power setting and don't run over 90% power

Matt McCoy
04-22-2016, 2:08 PM
Do you know what controller your machine has?

Tim Spiker
04-22-2016, 2:23 PM
no i dont.. ill have to see if i can find it..