Hurricane Laser Help

[Tim Spiker]

I recently got a Lisa catagory 1 laser but there is not much info out there about them... I'm looking for info on it's power/speed specs as well as if the settings in laser works represent the actual setting or a percentage of the max power/speed.... it don't seem to be percentage on the speed because numbers greater than 100 work. Also looking for a rotary unit or info on what one works with my laser. Any other info would be greatly appreciated. Thanks

[Bert Kemp]

Have you tried their tech support at Hurricane laser

[Tim Spiker]

From what I understand they are no longer in business

[Bert Kemp]

speed settings most likely mmps. what is the wattage of the tube?

[Bert Kemp]

I would not try to run at 100% power try to stay at 90 or below.....this may help you.

https://www.laserbits.com/lasersettings.html



(https://www.laserbits.com/lasersettings.html)

[Tim Spiker]

The problem is most of the charts i find seem to be based on a percent of power and speed and i believe the software for hurricane is not because i can set a speed of 200, 300, 400 and anywhere in between.. so without knowing what the max speed is i dont know how to convert to percentage... also i had been told it was a 60 watt laser but came across a old nbm video today showing the lisa as a 30 watt so that could be why my results are so different using settings for a 60 watt machine.

[Bert Kemp]

Tim most speed setting are based on mmps most power setting are bases on % if you go with that and use the 30 watt chart you should be in the ball park

speed 200 mmps 30 mmps so on and so forth use % for power setting and don't run over 90% power

[Matt McCoy]

Do you know what controller your machine has?

[Tim Spiker]

no i dont.. ill have to see if i can find it..