Bill George
04-15-2016, 4:23 PM
For some reason in the past month or so I have had several people asking about lasering glasses and mugs. I have been looking for a used rotary and gee new prices are up to $1700! I have some experience in building and working on CNC equipment and have some wiring diagrams and descriptions of my machine and the rotary.
Question: When you install the factory rotary on this 2007 machine, does the controller know the 9 pin connector for the rotary is installed and is there a Homing switch on the rotary that has to work?
The connector has 9 pins and 7 of which are used, 4 for the bipolar NEMA 17 2.2 amp .9 degree motor and 3 more that are called out as Homing? Wondering if at least one of those Homing wires is used to detect the rotary?
Question: When you install the factory rotary on this 2007 machine, does the controller know the 9 pin connector for the rotary is installed and is there a Homing switch on the rotary that has to work?
The connector has 9 pins and 7 of which are used, 4 for the bipolar NEMA 17 2.2 amp .9 degree motor and 3 more that are called out as Homing? Wondering if at least one of those Homing wires is used to detect the rotary?