Jonathan Spool
04-11-2016, 4:28 PM
I am making a large conference table where the top 1.125" thick and is split longwise and across, yielding 4 sections.
The table is designed to come apart and the sections used against the conference room walls as food tables.
I am using hardware that draws the sections together when they are sitting on the conference table pedestals.
A standard T&G profice is not substantial enough to really hold the edges together and I am looking for more of
a deeper trapazoidal type profile to do so.
Can anyone steer me to where I might find different profiles that might do the job? I thought of using XL Dominos
but they can get pretty tight sometimes when you need to pull them apart.
Thanks
Jonathan
The table is designed to come apart and the sections used against the conference room walls as food tables.
I am using hardware that draws the sections together when they are sitting on the conference table pedestals.
A standard T&G profice is not substantial enough to really hold the edges together and I am looking for more of
a deeper trapazoidal type profile to do so.
Can anyone steer me to where I might find different profiles that might do the job? I thought of using XL Dominos
but they can get pretty tight sometimes when you need to pull them apart.
Thanks
Jonathan