Wes Billups
03-20-2016, 10:39 PM
Looking for some input on what everyone would recommend for spray finishing a walnut bathroom vanity. I've used Target EM6000 in the past and wasn't real impressed with the quality of finish. It was interior trim so the finishing conditions were less than ideal. I have had good luck with CrystaLac but it's been a few years since I've used their product.
I'm looking for something that will be relatively easy to spray, non-yellowing, good durability, and water based. If it makes a difference I'm using a pretty dark brown water based dye under the finish. It'd be great if what you recommend was available locally but I'm not opposed to mail order.
My HVLP is a three stage Fuji if that makes a difference.
Thanks in advance,
Wes
I'm looking for something that will be relatively easy to spray, non-yellowing, good durability, and water based. If it makes a difference I'm using a pretty dark brown water based dye under the finish. It'd be great if what you recommend was available locally but I'm not opposed to mail order.
My HVLP is a three stage Fuji if that makes a difference.
Thanks in advance,
Wes