Grizzly tablesaw with router table ext question???

[Lewis Ehrhardt]

Anyone out there have a Grizzly tablesaw with router ext? If so, what router are you using? Is there one that can be adjusted from the top-side? Or, any suggestions for installing a router lift to it? Thanks Lewis

[Michael Stein]

I do not have the Grizzly router extension, I have the Peachtree router extension with the Bosch 1617EVS. I had to drill out a hole in the plate for the adjusment, but I am able to adjust bit height as well as change bits, from above the table. I am also able to change the collet on the router. It works great, so far.

[Robert Chapman]

Check Triton routers for easy adjustment.

[Curt Harms]

Quite a few routers come with above-the-table height adjustment these days. Also check into the spindle lock mechanism to be able to change bits with the router in place. I have a Freud FT2000E which is no longer available in the U.S. with router raizer add-on.