Mark Gibney
03-13-2016, 9:39 PM
I finished a table top and now I see there is some chip-out here and there. Can I fill this in now?
The wood is beech, and has two coats of 3-part finish on it now. The second coat went on today, I'm not sure how long I'd need to wait for it to dry to the point where I can fill the chip out.
I thought about using either CA glue or grain filler (I've never used grain filler), and then more coats of finish. Any advice is most welcome!
The wood is beech, and has two coats of 3-part finish on it now. The second coat went on today, I'm not sure how long I'd need to wait for it to dry to the point where I can fill the chip out.
I thought about using either CA glue or grain filler (I've never used grain filler), and then more coats of finish. Any advice is most welcome!