Anthony Whitesell
03-09-2016, 9:06 PM
I while (long while) ago I purchase a 1/2" and a 3/4" woodslicer and 3/8" woodturners blade from Highland Woodworking. I just got to try them this weekend. I can't seem to get the woodslicers to cut straight, they only seem to want to cut a circle. Not just a bad lead angle but an actual circle. It appears to be about a 18" radius. Any way to correct for this?
On the woodturner blade, as the blade passes over the table, it twists left and right. When rotating the wheel by hand, you can see the blade change direction left to right or or to left about every 12". Does anyone know if that is that by design or is there something wrong with the blade?
On the woodturner blade, as the blade passes over the table, it twists left and right. When rotating the wheel by hand, you can see the blade change direction left to right or or to left about every 12". Does anyone know if that is that by design or is there something wrong with the blade?