Richard Dooling
02-16-2016, 1:36 PM
I found this while looking at CBN wheels.
I've only sharpened carbide cutters on a diamond plate on a bench but here's another approach. I'll try this but I think I'll use a rare earth magnet as a handle on the diamond plate rather than risk my fingers.
http://woodturnerswonders.com/blogs/news/39925188-how-to-sharpen-a-carbide-wood-lathe-tool-bit-video
I've only sharpened carbide cutters on a diamond plate on a bench but here's another approach. I'll try this but I think I'll use a rare earth magnet as a handle on the diamond plate rather than risk my fingers.
http://woodturnerswonders.com/blogs/news/39925188-how-to-sharpen-a-carbide-wood-lathe-tool-bit-video