Siric Carter
02-07-2016, 2:07 PM
Hi,
Was doing some planing and realised that the planer was not feeding. Followed some advice on some threads and cleaned the rollers and the bed, but no change. Took off the side panels and on the drive side for the rollers, found that the sprocket that provides the power for the rollers is broken.
Will get a new one tomorrow, but when I turn the driver belt on the right hand side, the axle on the left hand side to which the sprocket was attached does not turn, and I cannot turn it by hand either. Is this supposed to be like this?
Thanks
Steve
Was doing some planing and realised that the planer was not feeding. Followed some advice on some threads and cleaned the rollers and the bed, but no change. Took off the side panels and on the drive side for the rollers, found that the sprocket that provides the power for the rollers is broken.
Will get a new one tomorrow, but when I turn the driver belt on the right hand side, the axle on the left hand side to which the sprocket was attached does not turn, and I cannot turn it by hand either. Is this supposed to be like this?
Thanks
Steve