Router Bit

[Darrin Davis]

Year's ago I saw a multi roundover bit where all you had to do is lower or raise the bit to use 1 of 2 radius profiles (and adjust the fence of course). I'm looking for one like shown below that I drew up with a 1/4" and 3/8" roundover. Any ideas where to find one. It's been too long since I've seen this. Maybe they discontinued them due to lack of interest.
331072

[Jay Aubuchon]

How about this (http://www.cshardware.com/tools/power-tools/bits/ft-99-044.html?gclid=CMmfjYCP5MoCFYw2gQodbroP5w)?

[Jerry Miner]

IMHO you'd be better off with two separate bits (AND you'd save $)