Installing New laser tube and Power supply

[StuartW Wilson]

Hi there I have received my new 50 watt Reci laser tube and power supply from china in seems to be good shape. I purchased from another supply and it arrived smashed on one end. Anyhow this is what my wiring looks like with old power supply330812 this is the new power supply 330813 and wire diagram 330814i am a complete newbie to working out which wires go where.Also with the tube which end needs to face up to remove the bubbles?I assume it is the outlet.330815 also is the tube installed on a slight tilt to remove the bubbles? All help appreciated regards Stuart

[Dave Sheldrake]

Wrong type of PSU, unless you have all the correct end connectors to change from the ones you have to the new type.

RECI don't make 50 watt tubes or PSU's so you may want to question the seller about that

[StuartW Wilson]

Interesting I will contact them. regards Stuart

[John Noell]

Here is what my 80 watt RECI tube and RECI power supply look like. I cannot imagine RECI selling what looks like a generic Chinese power supply with no branding on it. And FWIW, I paid $260 for the 80 watt PSU.