Bob Coates
01-29-2016, 7:44 PM
I have been experimenting with the “wedgie” sled and tried mixing different segment angles in the same ring. Here are two pictures using all the “wedgies” in each set offered by segeasy web site. The ring shown is using set 2 and was scanned to show detail accuratcy the sled can cut wedges. It is from the bowl with 4 sprials. Bowls are roughly 8 and 10 inches. Each ring is about 5/16 thick, stock was about 1 ¼ wide. Also attracted is a pdf file showing the cut list used, feel free to try your design. Number in [] is the number of that wedge angle size to cut. Warning, you won't have perfect circles until you turn it….