Bookmatched Walnut Bench

[Zuye Zheng]

New year, new project, new chisels.

Took the wife on a lumber run, she found the slab in the corner. Originally planned on a side table, but being 16/4, bookmatched it into a bench.
330549
330554

Resawing took almost 2 hours with a 5 pt rip.
330550

Framed in oak.
330551

Wenge butterflys.
330552
330553

Slabs are dadoed into the frame with a dowel in the front and back to allow for horizontal wood movement (hopefully).
330555

Its been a little over a year now since I got into woodworking. Started knowing only the big box stores, thinking power tools were king which was when I got my first set of chisels, transparent yellow handles and all. Much has changed since then and my foray into hand tools has escalated quite quickly with several "upgrades" to my chisel set with the most recent foray being Japanese chisels from Stu. I think I might have a problem...
330556

[Tony Wilkins]

Very beautiful piece - nice work! Better you than me on the resawing.

[Jebediah Eckert]

I like it, that's a cool looking unique bench. Respect on that resaw!

[Mike Null]

Your wife has a good eye. I have a feeling your in for a lot more projects.

Really creative use of the material and a very attractive result.

[Chris Hachet]

New year, new project, new chisels.

Took the wife on a lumber run, she found the slab in the corner. Originally planned on a side table, but being 16/4, bookmatched it into a bench.
330549
330554

Resawing took almost 2 hours with a 5 pt rip.
330550

Framed in oak.
330551

Wenge butterflys.
330552
330553

Slabs are dadoed into the frame with a dowel in the front and back to allow for horizontal wood movement (hopefully).
330555

Its been a little over a year now since I got into woodworking. Started knowing only the big box stores, thinking power tools were king which was when I got my first set of chisels, transparent yellow handles and all. Much has changed since then and my foray into hand tools has escalated quite quickly with several "upgrades" to my chisel set with the most recent foray being Japanese chisels from Stu. I think I might have a problem...
330556

As a chisel fanatic, I approve one hundred percent.

[Prashun Patel]

That piece is fantastic. People tend to give short shrift to the base on slab tables. I think the base is the most important part. It's so difficult to make one that (in my eye) matches the slab well. I really love your base. The details and size and proportions are just spot on to me.

And that's such a great presentation of the slab. I am noting this for future projects.

How long did you let the slabs acclimate after resawing?

[Barry Dima]

Its been a little over a year now since I got into woodworking.

:eek:. That's bonkers. The work I've seen of yours is tremendous—and must be equal to the amount of hard work you've committed during the time. Cheers to you.

And ditto everything Prashun says about your base. To add, through mortises in oak make my heart warm. Plus, that the bench's shape resembles the imprint of a large bottom makes it particularly welcoming. The piece is clearly a bench that's beautiful—not vice versa, if that makes sense.


Slabs are dadoed into the frame with a dowel in the front and back to allow for horizontal wood movement (hopefully).
http://www.sawmillcreek.org/attachment.php?attachmentid=330555&d=1454052900&thumb=1 (http://www.sawmillcreek.org/attachment.php?attachmentid=330555&d=1454052900)

This I'm curious about. Mind explaining why your went with wedged dowels over screws mounted some way underneath in elongated holes? Are your dadoes overly wide?
(Not trying to challenge here, just learn).

Thanks for sharing!

[Clay Parrish]

I would be afraid to sit on it; it's so beautiful ;-)

If I tried resawing that thing, my elbows would never stop hurting. Mad props.

[Jim Koepke]

New year, new project, new chisels.
[edit for brevity]
Its been a little over a year now since I got into woodworking. Started knowing only the big box stores, thinking power tools were king which was when I got my first set of chisels, transparent yellow handles and all. Much has changed since then and my foray into hand tools has escalated quite quickly with several "upgrades" to my chisel set with the most recent foray being Japanese chisels from Stu. I think I might have a problem...


Just a year? You must have a natural talent for this. The bench is gorgeous. Congrats on the hand resawing.

If you saw my chisel accumulation you wouldn't worry about having a problem.

Did you find the slab in a lumber yard in San Francisco? I knew of a few places there along Bayshore Blvd.

In Berkeley I used to get a few things form McBeath on Ashby. There is also Truitt & White near 2nd St. & Hearst.

jtk

[Zuye Zheng]

Thanks for all the support, much appreciated!


That piece is fantastic. People tend to give short shrift to the base on slab tables. I think the base is the most important part. It's so difficult to make one that (in my eye) matches the slab well. I really love your base. The details and size and proportions are just spot on to me.

And that's such a great presentation of the slab. I am noting this for future projects.

How long did you let the slabs acclimate after resawing?

I was actually too excited to see what was inside and didnt think of acclimating it until you mentioned it.. Resawed same day I think.. Probably would've been good to do so. The slabs are actually not too flat and semi sculpted, mostly from the saw wandering and partially by design, so hopefuly any cupping or twist won't show.


This I'm curious about. Mind explaining why your went with wedged dowels over screws mounted some way underneath in elongated holes? Are your dadoes overly wide?
(Not trying to challenge here, just learn).

Thanks for sharing!

I usually do turn buttons to mount my table tops with an elongated mortise, but I thought the dowel and wedge would look nice as an accent with the butterflies and I was tired of chopping mortises at that point so just busted out the drill.


Just a year? You must have a natural talent for this. The bench is gorgeous. Congrats on the hand resawing.

If you saw my chisel accumulation you wouldn't worry about having a problem.

Did you find the slab in a lumber yard in San Francisco? I knew of a few places there along Bayshore Blvd.

In Berkeley I used to get a few things form McBeath on Ashby. There is also Truitt & White near 2nd St. & Hearst.

jtk

My usual place is MacBeath near Bayshore since I don't have to cross the bridge, but was in Berkeley already that day so stopped by PALS in Oakland. Nice place, lots of species I've never heard of, reclaimed stuff, and random stuff like the small slab. A little cheaper I think too.

[David Eisenhauer]

Very nice work, great looking bench. What finish?

[Brian Holcombe]

Nice work!