xy diasabled

[Jim Peyton]

Just rec'd my epilog mini 24 and was doing a manual focus and somehow it returned home and now the xy disabled is on the control and I cant reset it. Ive tried turning it off/on to reboot but no luck. Ive looked over the manual but there's no troubleshooting that gives a fix. the air assist tube is against the bed so I'm thinking it will have to be manually cranked down??? any helpful suggestions out there would be appreciated.:mad: jim

[Mike Chance in Iowa]

Welcome to this forum Jim. Do a search in this forum and you will find several posts on this exact subject. The Search is in the upper right corner of this forum.

[John Noell]

To crank the table down manually, take off the front panel, grab the belt, and (gently) pull it to the right (at least on my mini).