PDA

View Full Version : Sticker/stack question



ryan paulsen
01-19-2016, 10:56 AM
I have a stack of WO that has been air drying for a little over a year. The stack consists of 10' 4/4 on the bottom, 8' 4/4 in the middle, and 7' 8/4 on top. I would like to reorganize the stack to put the thick stock on the bottom. I would like to put more weight on it, and I would also like to have the thinner stock available to begin using. I tried staggering the thick stock on the bottom, but I'm concerned about the stickers bridging the gaps created (~10"). Should I lay the shorter (thicker) stock side-by-side and build up the empty side of the stack with spacers? Any ideas?