Scott Welty
01-18-2016, 8:00 AM
Just wanted you all know that I put together this DIY swapsaw (http://a2equipment.com/swapsaw-panel-saw-kit/) recently and have had good success using it. The kit costs about $260 and you add some hardware and plywood to that for maybe another $50. Goes together ok but the instructions are a challenge. Paul, the designer of this thing is quick to answer the phone though and help you out. You use your own circular saw mounted to a plexi plate that they provide. That plate can come out of the tracks and be rotated 90 degrees to switch from cross cutting to ripping. Anyone else using this thing?