PDA

View Full Version : Bosch Glider Help Needed


Ed Gibbons
01-09-2016, 2:28 PM
The bevel lock handle is very difficult to move. Is there any way I can loosen the handle?
ed vitanovec
01-09-2016, 2:53 PM
When you assemble this lever did you put the 10mm washer in place?
Al Bacon
01-09-2016, 3:06 PM
I had this same problem with mine. In the book you will find the answer. Don't have it in front of me now but you need to loosen a nut on the back of the machine and it will free up.
Ed Gibbons
01-09-2016, 9:39 PM
Solved the problem. Thanks.
Rick Moyer
01-10-2016, 6:28 PM
I don't have that tool, but it would be nice for others to know the solution, if you would care to share.


Solved the problem. Thanks.
Ed Gibbons
01-12-2016, 3:42 PM
Behind the saw there is a round housing. Inside the housing are 2 bolts. Adjust the smaller bolt with 17mm socket. It was an easy fix.
Ed Gibbons
01-12-2016, 3:49 PM
329217

Above are 2 pictures that show where the adjusting bolt is located.