Incra Router Fence on a Bench Dog ProMaxRT Cast Iron Table Top

[Marshall Geller]

Just wondering if anyone has successfully mounted an Incra Router Fence on the Bench Dog ProMaxRT Cast Iron Table Top?

From what I have read, the brackets that come with the fence will only accomodate router table tops that are up to 1 3/8” thick and the Bench Dog Cast Iron Table is 1 1/2” thick – so some sort of modification is necessary to secure the fence to the table. (FYI – this is the standalone cast iron top – not the extension wing to the TS).

Thanks,
Mordi

[David T gray]

only issue i see is u wont have enough room behind the bit i would do something like this any extension to the table would work https://www.google.com/search?q=incra+fence+on+cast+iron&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjtpbeBzJbKAhXEbiYKHYyUAcwQ_AUICSgD&biw=1280&bih=657#tbm=isch&q=incra+fence+on+cast+iron+with+80%2F20&imgrc=eb3OfrqqUA9cZM%3A

. pretty sure this is the same cast top but cheaper http://woodworker.com/large-cast-iron-router-table-32-x-24-mssu-165-548.asp?search=router%20lift&searchmode=2

i bought one of the woodtek tops recently when they had a store closing for 35% off they shipped it fright for $13 i dont see how they made any money off the top it was as flat as my strait edge with one cup in a corner