SawStop ICS Height w/ Base

[Dan Schmidt]

SawStop specs show the ICS height is 34". Does this include the ICS mobile base, and is this the measurement you guys get?

[Frank Pratt]

I have a PCS with the industrial base. It only adds the thickness of the steel straps that go underneath the saw, maybe 1/8" or a little more.

[Ben Rivel]

Same here with the PCS and ICS base, its just an 1/8" thick bar under the saw so it would only add that much when not raised.

[Larry Frank]

I have the PCS with the industrial mobile base. I am 6'3" and it was way to low for me and my bad back. I built a 6" tall base to put in the mobile base and then saw on top. I painted the case black and it looks like it belongs.

[Keith Hankins]

I have the 5hp ICS with industrial base. It's 34 1/4" from table top to floor. The industrial base is worth every penny! Great saw you will love your forever saw. If you have any other questions let me know

[Dan Schmidt]

34-1/4". Thank you Keith!