Greg R Bradley
12-23-2015, 3:18 PM
Back on 11/13 there was a discussion about quality impact driver bits. Tom of Carbide Processors offered to send a pair of their Terminator bits to the first five people that asked for them. I was one of them. I have now had a chance to try them out hard. I looked for the original post but it is clearly gone - perhaps to stop more people asking for free bits.
Anyway, I asked for a pair of T-30 because those get the hard use. We have driven hundreds of construction screws with them ranging up to the big GRKs going 7" into old beams. Also driven a number of the GRK Caliburn concrete screws and those can take some pounding.
I'm impressed and will be buying those in the future.
Anyway, I asked for a pair of T-30 because those get the hard use. We have driven hundreds of construction screws with them ranging up to the big GRKs going 7" into old beams. Also driven a number of the GRK Caliburn concrete screws and those can take some pounding.
I'm impressed and will be buying those in the future.