Anniversary Chest Build Pics – Finished

[Mike Allen1010]

I finally got around to finishing a mahogany chest for our 30th anniversary. There’s an earlier post that describes the first steps of the build.

I added the plywood bottom after the chest was assembled by using an electric router to router the rabbit. I prefer hand tools, and frankly routers scare the crap out of me, but doing stopped rabbits by hand takes me forever and given the complexity of the assembly, it was just a lot easier//faster route the rabbit after.
326945

Sawing out Cocobolo handles with the coping saw. I used rasps and files to shape the curved profile and gouges to create a finger recess on the bottom.
326946326947326948


Next was the step I had been dreading; carving a sort of flower garland for the front of the case. I am a novice, self-taught carver and I really had no idea how to carve this. Despite excellent advice and coaching from incredibly talented Karl Anderson, it took me the equivalent of three workdays to complete. If I were to do it again, per Karl's suggestion, I would try and use a coping saw to saw out the outer profile of the leaves as close as possible to the layout line. I don’t have an electric jigsaw which would’ve made that job a lot easier and I’m sure I would break it if I tried to saw the profile by hand with a bird’s mouth, so I ended up removing the waste with carving tools. The carving is screwed to the front panel from the inside, which was a real white knuckle experience!
326949326950326951326952

[Mike Allen1010]

326953326954




Finally building the sliding till. I use this sliding layout tool for inside dimensions all the time, which for me is a lot easier than trying to estimate with a ruler.
326955

I found something called “leopardwood” at “tropical exotic hardwoods” here in Carlsbad – kind of pricey but they have a fantastic selection and they'll even put a picture of your project on the wall.
Leopard wood was deftly not hand tool friendly; very dense and lots of interlocking grain that planed as tiny shaving/dust.
326956 326957

Dimensioning the till pieces, cutting the tiny dovetails adding the supporting trim strip that rides on the rails inside the chest.

326958326959326960

[Mike Allen1010]

326961


Here’s pics after the first coat of oil/varnish. Once I get the shellac on this I think it’s can look pretty cool.

326962326963



And finally pictures of the finished chest.
326964326965326966326967326968




What I took away from this project is:

1) Mahogany is a great hand tool wood.

2) Even though this is the second time I built this design, the joinery on this chest is worse than the first one because I cut the dovetails joining the case rails before gluing up the frame and panel carcass assemblies. The difference in the finished vertical dimension was enough to throw the alignment of the pins and tales out of whack. Accordingly, glue up was a nightmare! Several splits etc. At that point I really considered scrapping the whole thing, but with some judicious repairs (sawdust and glue are your friends:)) it turned out okay. Not my best work, but probably only another woodworker would see the flaws.

3) Carving and inlay are doable for me to add decorative elements, but I’m not very good, they take me a long time and I have zero confidence in my creative ability to integrate them into a design that looks good. For those reasons, I think I’ll use these elements sparingly in the future.

Thanks for looking, Mike

[Jim Koepke]

To heck with any mistakes, missteps or errors, it is a great looking piece.

jtk

[Barry Dima]

This is a tremendous project, Mike. Thanks for sharing all the steps. It's really fun to watch all your dread end up as beautiful work. Suspense and art!

[Christopher Charles]

Hello Mike,

Tremendous work. Your self analysis reminds me of a quote that goes something like "writers are those for whom writing is harder than it is for others". I think the design of the chest and the decorative elements are both well balanced and the carvings in particular create and celebrate the intended purpose.

Best,
C

[Patrick McCarthy]

Fabulous Mike, absolutely great. I am very impressed with (and more than slightly jealous of) your productivity. I am going to have take some time management classes from you!

Best regards, and CONGRATS on 30 years (although, one must wonder how she was ever able to put up with you for soooo loooonnnggggggg), patrick

[John Kananis]

Awesome chest - the coopered top really makes it!

[David Eisenhauer]

Beautiful work. Love it.

[Jay Jolliffe]

Beautiful work..beautiful chest...

[george wilson]

Leopard wood must be the same thing as Australian lacewood,also called silky oak,and in reality a member of the eucalyptus family. I used a bunch of it in making the Art Deco table and jewelry box which can be seen in the FAQ section.

[Mike Cherry]

That looks tremendous Mike A!

[Brian Holcombe]

Nice work Mike!

[Frederick Skelly]

It's beautiful Mike!

[Mark Almeidus]

Absolutely stunning work. I like the glow golden effect that will pop up and get the attention wherever you put it.

[Mike Allen1010]

Thanks a lot guys I really appreciate the feedback. If great to have a place like SMC where we can talk about woodworking stuff and share our work.



Fabulous Mike, absolutely great. I am very impressed with (and more than slightly jealous of) your productivity. I am going to have take some time management classes from you!

Best regards, and CONGRATS on 30 years (although, one must wonder how she was ever able to put up with you for soooo loooonnnggggggg), patrick

Counselor, you're absolutely right – I have no idea how she's put up with me for so long. I must have some redeeming quality I'm not aware of :confused:. My time management strategy is simple; empty nester + insomnia = shop time, that and I'm a limited one-dimensional guy. I'm sure once you've finished protecting the rest of us from the forces of tyranny and oppression, you'll find more shop time too :)!


[Quote = Christopher Charlers] Tremendous work. Your self analysis reminds me of a quote that goes something like "writers are those for whom writing is harder than it is for others". I think the design of the chest and the decorative elements are both well balanced and the carvings in particular create and celebrate the intended purpose.

Thanks Christopher for another of your typically insightful comments. Truth is I make a lot of mistakes and I got lucky with this one, turned out okay.

BTW, I love the Nautilus inlay you use for what I guess is called an avatar? Any chance you've got a picture/design of that you would be willing to share? I'm currently working on one more, smaller version of his chest with a nautical theme (I'm hoping third time's the charm and I get this one right without white knuckle mistakes) and I would love to try and do something similar.

Best wishes for Happy holidays to all!

Mike

[Karl Andersson]

Mike,
Sorry for not commenting sooner, I was away from the network for a few days; You did some great work, the chest looks very nice and should warm her heart for a while at least :D. Doing something for the first time on an important gift takes a lot of courage (or ignorance of the challenge, as in my case), but it's a great way to gain skills because you really focus on what you're doing. You've gotten good at carving; keep it up! You know, since you've documented the design and build so well here on SMC, you should print out all your posts (and maybe some of the feedback) along with the photos and make a little booklet about the build that can be kept in the chest for "the future" and also to further impress on your sweetheart what you went through for her chest. Might be worth a hug or two...
Happy holidays to you too
Karl

[Mike Allen1010]

Thanks a lot Karl, I really appreciate your feedback and the suggestion about printing out documentation of the build. I might just do that in And tape it to the bottom somewhere.

As a novice, self-taught carver, I am a HUGE fan of your work! My pedestrian carving looks awfully mechanical next to the true art that you create. I really encourage my fellow Neanders here in the cave to visit the carving forum to see some of the fantastic work you and other carvers do. Thanks for the inspiration to try something new.

Best, Mike

[Jeff Ranck]

Well done, Mike!

[Anthony Albano]

Nice!! I sure like that

[Ron Bontz]

Nice work as always, Mike.