steven c newman
12-04-2015, 6:11 PM
had some walnut slabs to cobble something together with. Soo, a small, coffee table sized item came from the stack of boards.
326414
40"x 14" by 19-1/4" high. has a few curves, to add a bit of interest.
326415
A little better lighting. There are two knots in the top. Filled them in.
Bottom shelf needed end caps.
326416
One leg has a LOT of sap wood in it. There is a hole straight through the leg, from a knot on one side of the leg.
Two coats of Poly, rubbed out each time, final coat is a buffed on of O'Sullivan's Oil Finish.
Seemed to bring out the grain nicely, too.:D
326414
40"x 14" by 19-1/4" high. has a few curves, to add a bit of interest.
326415
A little better lighting. There are two knots in the top. Filled them in.
Bottom shelf needed end caps.
326416
One leg has a LOT of sap wood in it. There is a hole straight through the leg, from a knot on one side of the leg.
Two coats of Poly, rubbed out each time, final coat is a buffed on of O'Sullivan's Oil Finish.
Seemed to bring out the grain nicely, too.:D