Saving specific x-y position for later use

[Roger Lueck]

In Laserworks 6.0 are you able to save a previously used x-y location for future or repeated use? An example would be when running a large number of identical pieces there is a need to insert a single piece job into your schedule that requires a different x-y starting point on the engraving table due to size or shape of the single piece job.

The scenario would be in an order of execution similar to this:

1. Establish the x-y starting position using the origin key on the LCD for the first job

2. "Save" the x-y starting position of the first job

3. Begin engraving the first job

4. Establish a different x-y starting position for the second job using the origin key on the LCD

5. Engrave the second job

6. Return to the "saved" x-y starting position used for the first job

7. Resume engraving the first job



Thank You,
Roger A. Lueck
Morntech MT-3050
50 Watt
Laserworks 6.0