View Full Version : What the heck is this?
Michael Weber
11-29-2015, 10:17 PM
Ordered and and received a Blanco front apron sink. Looking at the dimension drawing there is an angular measurement shown as 2* >8<. That's 2 degrees but what is the significance of the ">8<"?
John Stankus
11-30-2015, 10:27 AM
Is it possibly a formatting code gone awry? unicode number for a degree sign is 176 or B0 in hexadecimal
mike holden
11-30-2015, 12:13 PM
Probably the tolerance. In this case, that would be 2 degrees, plus or minus 8 minutes.
Mike
Myk Rian
11-30-2015, 3:13 PM
Is it possibly a formatting code gone awry? unicode number for a degree sign is 176 or B0 in hexadecimal
Or in forums such as this, hold the Alt and type 167. º Alt176 gives you this, ░
Gerry Grzadzinski
11-30-2015, 3:47 PM
I use Alt + 248 °
Doug McKay
12-04-2015, 1:08 PM
Is their a chance it was trying to telling you 2 faucet holes on 8" centers?
ken masoumi
12-04-2015, 3:17 PM
Is their a chance it was trying to telling you 2 faucet holes on 8" centers?
+1,
Most kitchen faucets are 8-inch center to center.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.