View Full Version : Rdlc 320a controller problem?

Rangarajan Saravana kumar
11-24-2015, 3:04 PM

I have a chinese machine with laser controller RDLC 320A with recent problem , as i feel culprit in the controller.

1. when i start the machine , it doesnt respond to move in either x axis and y axis.

2. I swaped the x and y amplifiers and saw no change.

Would there be any idea to correct in the controller or even check any other problem.

Earlier to this problem, the machine is moving y axis only. After restarting , both axis is failing to initiate