HInge Idiot

[Scott Welty]

Putting frameless cabinets side by side. 3/4 thick. What hinge to use so that I cover most of the shell but not crash into the door/drawer that is along side? Is there something besides full and half overlay?

Scott

[Steve Jenkins]

Full overlay will cover the 3/4" sides but due to the way it opens the door won't hit the one next to it. Half overlay covers about 3/8".

[Peter Kelly]

Full overlay is what you want.

http://www.cshardware.com/fr-h41811a.html
http://www.cshardware.com/fr-eb1002mg00.html

[Gerry Grzadzinski]

Full overlay concealed hinges allow for a ±1/16" reveal.

[Scott Welty]

Thanks again everyone! Onward!

Scott

[Erik Christensen]

you can also tweak the reveal a bit by varying the cup hole location relative to the edge of the door - when in doubt i drill test holes in some scrap 3/4 ply and see how it works - even after you have drilled the door you may be able to adjust things by swapping out the mounting plate for one of a different height