Void Fillers

[jeffrey bailey]

I have a piece of sassafras that has a very appealing hole in it created by a knot that has rotted away. I would like to fill the hole with some kind of clear substance that will be very clear and not yellow over time. I have attached a picture. Any ideas?
325406

[Steve Jenkins]

Use a quality epoxy such as west system or system three.these can be tinted also.

[Bill McNiel]

WestSystems epoxy

[Jamie Buxton]

Yup. West Systems epoxy. Use the slow catalyst. In a volume as large as that, the fast catalyst may self-heat to cure too fast -- before the bubbles have a chance to get out.

[jeffrey bailey]

Thanks, I will give it a look

[Ben Rivel]

To be clear, you guys are recommending this: LINK (http://www.westsystem.com/ss/epoxy-resins-and-hardeners)?