John Jussel
11-15-2015, 10:59 AM
I now have a new Table Saw (Bosch 4100-09). I understand it is a 15 amp motor. I would like to purchase a decent shop vac to hook up to the dust port on the TS. I would like to be able to just turn on the TS and have the shop vac start too. And when I turn off the TS the shop vac would turn off too. My question is what switch are you using to be able to do it? I did a quick search on Google and found this one "i-socket 110m Tool and Vacuum Switch".
It says it is a 15 amp/125volt circut. Does that mean it would not work with my TS (15 amp) and a 10 amp shop vac for example? If not, what kind of switch would you recommend I get to be able to do what I would like?
Are there better basic switches to perform the same function?
Thanks,
John
It says it is a 15 amp/125volt circut. Does that mean it would not work with my TS (15 amp) and a 10 amp shop vac for example? If not, what kind of switch would you recommend I get to be able to do what I would like?
Are there better basic switches to perform the same function?
Thanks,
John