View Full Version : Stanley "V" Logo Irons
Mark R Webster
11-13-2015, 11:04 AM
Can anyone give me a lead on where to puchase two Stanley "V" Logo plane irons for a #607 and one for a #608? I have unsuccessfully tried most of the usual sources ie Ebay.
Thanks
Mark
Patrick Harper
11-13-2015, 12:04 PM
Have you tried Josh Clark at Hyperkitten?
Mark R Webster
11-13-2015, 12:38 PM
No.. I will contact him. If anyone has some please PM me. Also other suggestions would be appreciated.
Thanks
Mark
Stew Denton
11-13-2015, 9:06 PM
Mark,
If you watch Ebay long enough, sooner or later they will almost certainly show up. As you know there are a lot more irons around for the 7s than for the 8s.
Stew
Mark R Webster
11-13-2015, 9:24 PM
Good to know thanks Stew.
Mark
Jim Koepke
11-13-2015, 10:14 PM
There are a few places.
Have you tried Patrick Leach or Bob Kaune?
http://www.supertool.com/
http://www.antique-used-tools.com/comparts.htm
jtk
Mark R Webster
11-13-2015, 10:27 PM
Yes Jim thanks, I have contacted both, neither have any at this time.
Mark
steven c newman
11-13-2015, 10:53 PM
Or, maybe Eric @ nhplaneparts.com???
Mark R Webster
11-13-2015, 11:02 PM
Eric doesn't currently have them thanks.
Mark
I do appreciated everyones suggestions.
lowell holmes
11-14-2015, 6:59 AM
If all else fails, I have the new Lee Valley iron and breaker in my 607 plane.
I recommend it.
Mark R Webster
11-14-2015, 1:48 PM
Yes I agree the LV iron and breaker are great, I was just trying to get the planes all back to original. :)
Kevin Hampshire
11-14-2015, 10:48 PM
Mark, Last time I was looking for a specific blade I ended up buying a user Bailey and a user Transitional for some near new blades. I just scanned the photos on ePay till I found a planes with the blades I wanted.
Not sure about the specifics for you 607 and 608 restoration.
Mark R Webster
11-14-2015, 11:58 PM
Thanks Kevin for the input, hopefully I won't have to buy a whole plane.
Patrick I contacted Josh and he doesn't have any at this time.
Mark
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.