Gabriel Rangel
11-08-2015, 3:29 PM
Hello all I have a Accuris Powersharp 12 that has quite firing the laser. I sent off the tube to have it check I had it recharged about 8 months ago.
They tested and ran the tube for 3 day with no problem. So I was told it looks like it is a power supply problem I order a new one it was not the same
as the one that came in it but was told it would work just to wire it up like it say we did but we are still not getting any power to the tube none of the lights come on
on the tube at all there is a rely what was not powering up but now that the new power supply is in it is powering up but not getting any power to the tube.
Any Ideas on this.
thank you
Gabriel
They tested and ran the tube for 3 day with no problem. So I was told it looks like it is a power supply problem I order a new one it was not the same
as the one that came in it but was told it would work just to wire it up like it say we did but we are still not getting any power to the tube none of the lights come on
on the tube at all there is a rely what was not powering up but now that the new power supply is in it is powering up but not getting any power to the tube.
Any Ideas on this.
thank you
Gabriel