Ken Frohnert
11-08-2015, 12:47 PM
I was looking at this little midi at the Sears Store. I don't buy much from there except sockets for my ratchets - but I saw this midi and thought it had pretty good specs.
It is pretty heavy at 96lbs and has a 12" swing and 16" between centers. The motor is only 1/2 hp but unlike some of the smaller lathes this one has metal cooling fins on the motor which should help.
Any experiences on this lathe?
It is pretty heavy at 96lbs and has a 12" swing and 16" between centers. The motor is only 1/2 hp but unlike some of the smaller lathes this one has metal cooling fins on the motor which should help.
Any experiences on this lathe?