mike micus
11-03-2015, 5:59 PM
Hi everyone,
Ok I have a xenetech aurora laser 30watt. I sent my tube off to be recharged and it is a coherent gem 30 watt. I also have a sp500-48 10 amp power supply that is separate from the tube. The 10amp power supply ran the 30 watt tube from day one when it was installed from xenetech but now that I had the laser tube recharged the person that recharged it says I need a 15 to 20 amp power supply to run the tube. Do I need the bigger amp or can the 10 amp power supply run it with no problems. It seems like the 10 amp should be fine seeing it was in there to begin with. Thanks Mike
Ok I have a xenetech aurora laser 30watt. I sent my tube off to be recharged and it is a coherent gem 30 watt. I also have a sp500-48 10 amp power supply that is separate from the tube. The 10amp power supply ran the 30 watt tube from day one when it was installed from xenetech but now that I had the laser tube recharged the person that recharged it says I need a 15 to 20 amp power supply to run the tube. Do I need the bigger amp or can the 10 amp power supply run it with no problems. It seems like the 10 amp should be fine seeing it was in there to begin with. Thanks Mike