earl wojciechowski
11-01-2015, 5:01 PM
I have built a workbench out of 2 X 4's. It is 24" wide by 10' long. I have several sliding drawers that I would like to put a door in front of. The openings of the drawers are 24" wide. I have the BLUM Compact 33 hinge, but not sure which mounting plates I need. There will be two doors per drawer. The the mounting plate will mount onto the 1.5" side of the 2x4, with the 4" side facing the front. I currently have the 1.5" mounting plate, but it is not working.
Any suggestions would be greatly appreciated.
I do have a rough sketch up drawing I could share if that would help.
This has been kicking my butt
Earl
Any suggestions would be greatly appreciated.
I do have a rough sketch up drawing I could share if that would help.
This has been kicking my butt
Earl