PDA

View Full Version : is shenfui fume extractor any good?



Siert Vos
10-25-2015, 9:10 AM
Hello, i received a quote from Vickie at Shenhui for :

SH-G350D 60W ,auto focus , imported lens with red dot ,1800USD
2. Extra laser tube 125 USD
3. Extra imported lens , 35USD
4. Air filter , Normal one 650USD ,
YC3106 Air filter , 1000USD ( Too expensive )
5. CW5000 Chiller , 388USD

Now my question is, does anyone have any experience with the standard fume extractor?
324017My concern is that my shop is hooked up to a central smoke alarm which i cannot reset! I just don't want this alarm to go off.
So any experience with this fume extractor would be appreciated.

regards,

siert

Keith Winter
10-25-2015, 10:16 AM
Unsure on this extractor but can you not vent to the outside?

Siert Vos
10-25-2015, 10:42 AM
Unfortunately ican only vent to the main road in front of my shop. Also there are appartments above and im concerned they will complain about the smell.

Bert Kemp
10-25-2015, 12:17 PM
See Dan Hintz blog home built fume extractor cheap build


Unfortunately ican only vent to the main road in front of my shop. Also there are appartments above and im concerned they will complain about the smell.

Dave Sheldrake
10-25-2015, 12:27 PM
My concern is that my shop is hooked up to a central smoke alarm which i cannot reset!

A central building system? if so then I'd be looking at a Western made BOFA or suchlike as well as reading up on your liabilities if you set off the fire suppression systems in your building.

Siert Vos
10-26-2015, 5:18 PM
exactly...thats why i dont want to waste money if the fume extractor isn't any good.
That's why i'd like to know if anyone has any experience with this small fume extractor.

Jeff Body
10-26-2015, 5:29 PM
I'd suggest finding a different location to install this. Nothing about that situation sounds good.

Dave Sheldrake
10-26-2015, 7:45 PM
I'd suggest finding a different location to install this. Nothing about that situation sounds good.

I tend to agree with Jeff, risk over effect doesn't balance very well in this case.

Siert Vos
10-27-2015, 3:44 PM
thats not an option...i will look into Bofa
thanks anyway.

Tony Lenkic
10-27-2015, 7:38 PM
Siert, where are you located?

There are handfull of manufacturers to look at and compare features and pricing.

Siert Vos
10-28-2015, 2:43 AM
Im in the Netherlands.

Tony Lenkic
10-28-2015, 8:21 AM
Ok,

I don't know how well the Shenhui unit is built ------1K is a bargain.
You will get shock on western built units but they are all solidly built.

Check out Bofa $ Purex from UK and Teka from Germany.

North american built units are
Quatro-Air from Canada, Fumex from USA

Another option is to locate pre-owned extractors that may be listed on ebay or such sites.

Lastly, built your own and save.

Steve Morris
10-28-2015, 10:01 AM
one thing to bear in mind with the Shenhui is the availability of replacement filters.
I have a BOFA AD350 and works well for me.

Dave Sheldrake
10-28-2015, 11:59 AM
With central fire warning and control you need to be using quality commercial units. While very good systems, home build or cheaper imports may end up costing you a LOT of money in reparations if you set off a fire control system in the building.