Jim Dunn
08-28-2005, 7:56 PM
While trying to connect 6" SDR35 to the hub on my Jet DC I came upon a solution that is simple.:D First the problem was that the fittings are to large and the pipe is too small.:mad: SDR 35 can be purchased with a hub that has a rubber gasket inside. A little foam and some self tapping screws and the job is done.:eek: Practically no leaks.:p
Now the problem. The added weight seems to put strain on the sheet metal shroud that houses the impeller. So I shimmed it up. I could just see the sheet metal splitting and comming into contact with the impeller and FIRE.:eek:
Hope this helps someone in the future.
Jim
Now the problem. The added weight seems to put strain on the sheet metal shroud that houses the impeller. So I shimmed it up. I could just see the sheet metal splitting and comming into contact with the impeller and FIRE.:eek:
Hope this helps someone in the future.
Jim