Josh Lohr
10-13-2015, 9:38 PM
Hi,
I am new to steam bending and am wondering if I should even spend any time trying to do this design in wood. Most of it seems pretty easy since the bends are parallel with the grain, but at the top there is a 1.5" radius perpendicular to the grain. The wood is 1/2" thick. I can use any type of wood necessary to achieve this. I would love to hear some input on feasibility from others who are into wood bending. thanks!
323304
I am new to steam bending and am wondering if I should even spend any time trying to do this design in wood. Most of it seems pretty easy since the bends are parallel with the grain, but at the top there is a 1.5" radius perpendicular to the grain. The wood is 1/2" thick. I can use any type of wood necessary to achieve this. I would love to hear some input on feasibility from others who are into wood bending. thanks!
323304