Brandon Dickson
10-10-2015, 1:45 PM
Guys
I'm always amazed at everyone's ideas & expertise.
I'm building a live-edge dining table out of 5/4 poplar slabs I bought off a backyard sawyer. The 2 pieces aren't wide enough when put together for a proper dining table. I have a gap that ranges, depending on the curve of the wood, from 0 inches to 8.25 inches. I want to put a barnwood piece down the center. My barnwood is just barely over .5 in thick. So I want to attach it to some 3/4 plywood that I have laying around. It's pretty much the exact right thickness so I don't want to plane it smooth if I can help it.
Any tips on gluing the rough barnwood to the plywood?
Thanks!
Brandon
I'm always amazed at everyone's ideas & expertise.
I'm building a live-edge dining table out of 5/4 poplar slabs I bought off a backyard sawyer. The 2 pieces aren't wide enough when put together for a proper dining table. I have a gap that ranges, depending on the curve of the wood, from 0 inches to 8.25 inches. I want to put a barnwood piece down the center. My barnwood is just barely over .5 in thick. So I want to attach it to some 3/4 plywood that I have laying around. It's pretty much the exact right thickness so I don't want to plane it smooth if I can help it.
Any tips on gluing the rough barnwood to the plywood?
Thanks!
Brandon