Joel Wesseling
10-10-2015, 1:25 PM
Hi All,
I'm replacing all doors and end gables on a kitchen. I Veneered some 1/4 particle board panels to match the doors, and these need to be attached to the existing end gables of the original cabinets.
The panels have some warping and I need to stick them flat but I don't have the ability to apply pressure while the adhesive dries.
I'm certain Contact Cement would work but prefer to use something from a CALKING GUN.
Any suggestions? I need instant and permanent bond so the panels won't spring back.
Thanks!
I'm replacing all doors and end gables on a kitchen. I Veneered some 1/4 particle board panels to match the doors, and these need to be attached to the existing end gables of the original cabinets.
The panels have some warping and I need to stick them flat but I don't have the ability to apply pressure while the adhesive dries.
I'm certain Contact Cement would work but prefer to use something from a CALKING GUN.
Any suggestions? I need instant and permanent bond so the panels won't spring back.
Thanks!