View Full Version : Woodturner's Wonders 4 in 1 CBN Wheel
Edward Weingarden
09-30-2015, 11:51 AM
What does the 4 in 1 design provide that a regular flat top wheel doesn't? Thanks.
David Walser
09-30-2015, 12:12 PM
From their website:
This wheel has four useable functions:
1) It has the face of the wheel for normal sharpening and is 1.25" wide.
2) It has the 1/4" radius on each side as our present best seller for sharpening hollowing tool bits and scrapers.
3) It has a total side face of CBN material on both sides of 1" for non-hollow grinding of skews and scrapers!
4) There is a 9 mm 90 degree gap (about 1/3") space shoulder on the inside edge of the grinding wheel for making relief cuts or tapers on hook type scrapers or box scrapers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.