View Full Version : Stanley 923
Gary Herrmann
08-26-2005, 12:10 PM
I picked up a 10" Stanley 923 the other day. Just out of idle curiousity, does anyone know of a site where I could find out when it was made based on the serial number on it?
Mike Wenzloff
08-26-2005, 3:20 PM
Are we talking about the #923 10" Brace?
And unfortunately, I don't know of a type study on braces. I did check prices on the net and see dealers that have them for anywhere from $15 to $65 dollars.
If someone has a Walters, there might be some info in it.
Sorry.
Mike
Gregory Benulis
08-27-2005, 8:47 AM
Hi,
There is lots of good brace info here (http://www.sydnassloot.com/brace.htm) on Sandy Moss's web site.
HTH,
Greg
Mike Wenzloff
08-27-2005, 11:59 AM
Thanks for the link Greg.
Mike
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.