Supermax 19-38

[Kenton Keller]

I am getting close to pulling the trigger on the Supermax 19-38 from Acme tools. I found a decent used planer on Craigslist, but there hasn't been any drum sanders in the last couple of weeks, and the sale on the supermax is over at the end of the month.

Anyhow my questions are what to order with it.

Are the infeed and outfeed tables worth the extra $100.

I am pretty sure I can find some 1/2 stud casters cheaper somewhere else

I figure maybe a couple extra 100 grit rolls. Maybe 120's too? what grit do most of you use the most often?

anything else? Always cheaper to combine things when it is free shipping.

[Clay Fails]

I have had this sander for a couple months and so far am very happy with it. I did buy the outfeed tables but right now have only the infeed one installed. works fine. I purchased various grits in the precut 3 packs. I went from 60 to 220, but so far have found that 80 or 120 is a good day to day grit for my work. once you have the pieces roughed in, it's not hard to work through the grits to get a very smooth finish.

[jerry cousins]

using a 22-44 performax - i think in-feed & out-feed tables are worth the $100
jerry