Eric Shapin
09-05-2015, 10:01 AM
Owned this jointer since late mid 2013 - faithful service until yesterday. Symptoms/Debugging attempts as follows:
1. Plug in/Turn on machine - Dead Silence (running on 110 volts)
2. Verified circuit for wall outlet is working
3. Fastened input line/load wires to line/load wires that lead to motor. Plugged in, nothing (dead silence).
Does this automatically mean new (or repair) required to motor? Any other suggestions or items to test or look for? Thanks.
1. Plug in/Turn on machine - Dead Silence (running on 110 volts)
2. Verified circuit for wall outlet is working
3. Fastened input line/load wires to line/load wires that lead to motor. Plugged in, nothing (dead silence).
Does this automatically mean new (or repair) required to motor? Any other suggestions or items to test or look for? Thanks.