A new plane arrived yesterday from an undisclosed source.

[Brian Holcombe]

Today a new Trying planed arrived from An undisclosed source. I have been waiting a few years for undisclosed source to notice my subtle hints and put me on the docket. I inquired about planes but the source told me that the rumor has been around for some time but it wasn't true. I asked him to put me on the list for when the list opened up and he chuckled but was adamant that there wouldn't be one. Undeterred I pressed on to see if there was anything, but sadly, no. I closed my laptop thinking I may have to live a life unfulfilled. Later that day The source emailed to say that they had made a Trying plane for me to plane with...life works in mysterious ways.


http://i27.photobucket.com/albums/c181/SpeedyGoomba/6E4DB61C-462E-477E-91AC-2ACD5143301A_zpssvh1xpxz.jpg

now that I've had my fun, I'm curious to see if anyone can spot the maker. :D

[Patrick McCarthy]

I assuming Clark and Williams, or Old Street if that is the new name.

But whoever it is Brian, it IS INDEED a compliment to the talent you have demonstrated in your most excellent posts . . . . I think any toolmaker would take joy in seeing their tool in your capable hands.

The ONLY OTHER explanation, and a very low percentage chance at that, is they meant to mail it to me and you got it by mistake.

[Reinis Kanders]

I bet it was Mr. Weaver, looks like his stuff and it is a double iron.

[Pedro Reyes]

I bet it was Mr. Weaver, looks like his stuff and it is a double iron.

The screw on the tote tells me the same.

Pedro

[Patrick McCarthy]

QWhat screw on the tote?

i am only seeing one picture. . . . . . But not the first time I would have missed the obvious, unfortunately. But not changing my vote, even with my high regard for DW.

[Stewie Simpson]

Very nice Brian. Congrats.

Stewie;

[paul cottingham]

<Absurd admin edit>
nice plane, young fellow, nice plane indeed. A fine aquisition.

[Mark Almeidus]

Its Steve Voigt. Innit? :p

[Chris Griggs]

Hmmmmm. That looks very similar to my try plane from Undisclosed Source. I frickin love mine.

[Phil Mueller]

Don't know enough about planes to even venture a guess, but I'm thrilled for you. I know you're looking to move to the woodies, and that is one beautiful plane. Enjoy!

[Warren Mickley]

David made the tote. It also appears to be a nice planed surface. Larry Williams always sands.

[Warren Mickley]

It might be the same guy who wrote this:

"Warren - appropriately made would, to me (for a trying plane), imply a 50 degree single iron with a mouth several multiples of a smoother mouth, but one that would still be measured in a couple of hundredths. I don't know the last time I used a trying plane for a thicker shaving than that. My double iron planes all have mouths agape, and the chipbreaker cannot be set where it needs to be to break chips on them because their irons are radiused."

[george wilson]

I have inside info on who made the plane!!:):):) Nice job!!

I also have inside info that this maker paid more for that piece of wood than a good LN plane costs!!!!!

[Patrick McCarthy]

George or Brian,
again revealing my vast ignorance, I must ask : what type of wood is it?

[Pat Barry]

I have inside info on who made the plane!!:):):) Nice job!!

I also have inside info that this maker paid more for that piece of wood than a good LN plane costs!!!!!
If that's the case Brian must have very deep pockets or compromising photo's of the builder

[Andrew Hughes]

For me a plane is just a plane all the same cutting wood, but that piece of wood looks like a fine chocolate.Make my mouth water.Its gotta be some killer Mahogany.
Nice tool would love to have one.

[Stew Denton]

Brian,

Beautiful plane. I only have one guess who made it, but it is only a guess, and not a knowledgable guess at that, so I'm going to let it go at that rather than share my ignorance.

The plane reminds me of the old saying, which definitely is fitting here, "a thing of beauty is a joy forever."

Congrats on the beautiful plane, and my congrats on the maker on having the skill to build such a plane.

Stew

[Chris Griggs]

George or Brian,
again revealing my vast ignorance, I must ask : what type of wood is it?

The wood is beech

[Brian Holcombe]

Thanks fellas for letting me have my fun :D I appreciate the kind words as well.

Nice eyes! Very impressive! The plane is from David Weaver. He and I talk about planes on the regular and so he graciously offered to make one for me. It's made from beech, entirely by hand, and is working fabulously. Nice thing is that he does all of the diagnostics before sending, so basically I set the iron in place and started working.

The issue I was having in my workshop was that it was difficult for me to work large panels with my metal jointer plane. The extremely flat surface of the jointer plane was adding a ton of friction to the cut when the panel started to get very flat and even waxing the sole was not solving it for me long term. This certainly cures the ailment and offered much in the way of enlightenment for me, having not previously used wooden planes outside of joinery planes.

[Matthew N. Masail]

I was going to say it was Mr. D too, nice bounce of of Kieth post! lol

it looks fantastic. I'm sure you'll enjoy it very much. I personally don't go fo rmetal plans larger than a 5, too heavy and clumsy..

[george wilson]

I exaggerated about the cost of the beech,of course. But,the price of beech,a very common wood(which was why tools were mostly made of it),seems to have gotten completely out of hand,being rarely cut these days. No one uses it much any more. They used it a lot in England for many things. I used to have an antique set of English Queen Anne dining chairs made of beech,and stained to look like mahogany. Chair bodgers used to set up a crude lathe in the woods in the spring,and cut beech,and turn it into chair legs and stretchers all Summer in England. They stacked the turnings up to dry as they were made. Their lathe was one of those made between 2 trees sometimes,powered by a rope wrapped around the wood and connected to a foot treadle.

I stay in touch with David,and was aware of this plane. He does very,very nice work on them!!:)

[Tony Zaffuto]

Very, very nice plane! I wish David would pop in here again, place is not the same without him.

[george wilson]

Me too. ++++1

[James Pallas]

Very nice plane Brian. Good builder, good mentor = excellence. Enjoy.
Jim

[Harold Burrell]

I stay in touch with David,and was aware of this plane. He does very,very nice work on them!!:)

I stay in touch with David too, George. He is a GREAT guy. And...I thought you should know...he thinks the world of you. You often come up in our conversations (because I am a closet George Wilson Fan myself).

Believe you me, you...saying what you just said...about him and his work, will mean more to him than all the time and effort that he put into building it.

Seriously.

[Brian Holcombe]

Cheers, Thanks gents!

[Keith Mathewson]

Beautiful plane. Your first post was certainly a bit of deja vu. Using a wood bodied try plane is much nicer imo than a metal bodied one. You get a lot more feedback from the tool. enjoy!

[Brian Holcombe]

Hehe, I was wondering if you would stumble upon this thread. Agreed, I really enjoy the feedback from the plane, it's been eye opening to use.

Thank you! Do the same!

[Charles Murray Ohio]

The wedge does not look like an Old Street Tool wedge. Also it appears to be a double iron, and they use a nail in the tote to attach it. The champers on the side don't look like the ones on my C&W Trying plane. That being said more photos would help.