George Farra
09-02-2015, 4:45 PM
Was considering building one that rides the rip fence, but if any of the commercially available ones can be used I'd rather go that route.
Any Bosch 4100 users please chime in. I know the top of the TS is a soft metal and all the commercially available jigs are cast iron, so I dunno if the jig will mar, scratch, mess up the TS surface. Also, not sure if the miter slots on a 4100 line up with the blade in the same distance as their bigger brothers.
Any input would be greatly appreciated
TIA
George
Any Bosch 4100 users please chime in. I know the top of the TS is a soft metal and all the commercially available jigs are cast iron, so I dunno if the jig will mar, scratch, mess up the TS surface. Also, not sure if the miter slots on a 4100 line up with the blade in the same distance as their bigger brothers.
Any input would be greatly appreciated
TIA
George