PDA

View Full Version : Trouble with rotary laser engraving



Brad Bylls
08-30-2015, 5:02 PM
We have a Universal 40w laser with rotary attachment.
I create the artwork in CorelDraw X6, and when I print, the letters and words show up skewed and streaked in the Universal software that drives the laser.
When just doing flat engraving there is no problem.
Anybody have this problem and maybe a solution?
Thanks.

Mark Sipes
08-30-2015, 10:31 PM
A photo would be helpful. Are you setting the Diameter in the universal software? Did it just start happening or is this the first time you have attempted rotary items.

.

Nicolas Silva
08-30-2015, 10:59 PM
I use Corel with my ULS M-300. Somewhere in the driver you should enable the rotary attachment. You have to set your page up to the correct size as well (diameter x 3.14) and length both in the driver and the corel page.
Beyond that it shouldn't see any differences versus flat engraving.