View Full Version : minimax/hammer lift bars?
Matthew Hills
08-25-2015, 10:26 PM
Anyone know if the lift bars for the minimax and hammer mobility kits are interchangeable?
Matt
Erik Loza
08-25-2015, 11:19 PM
Which machine do you have presently?
Erik
ian maybury
08-26-2015, 6:42 AM
Not the question, and not necessarily to everybody's taste, but a DIY mobility kit using parts entirely from the local hardware is perfectly feasible:
320270
Matthew Hills
08-26-2015, 9:41 AM
I have a lift bar from a current MM16/s400p.
Am wondering if it works with the J/P (either MM FS30 or Hammer A3-31)
Matt
Erik Loza
08-26-2015, 11:40 AM
I have a lift bar from a current MM16/s400p.
Am wondering if it works with the J/P (either MM FS30 or Hammer A3-31)
Matt
Matt, the FS30 is designed to have threaded casters installed from underneath. There's a female M12x1.75 hole in each corner of the base. It doesn't really have a specific "lifting point", like your MM16 does (the brake pedal). The other option is the HTC3000 universal dolly-type base, which is about $100 on Amazon. Not as elegant as casters but lots of FS30 owners seem satisfied with it.
If you're in the market for an FS30, shoot me an email at eloza-at-scmgroup-d0t-c0m. We still have some machines left from the AWFS promo allocation.
Erik
Ben Rivel
08-26-2015, 11:45 AM
Give Felder or Hammera a call and ask. They are very helpful.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.